This is the latest recevied telemetry packets stored in our database for station/object SP8AA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785835001 | 613 Count | 37 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785834818 | 612 Count | 37 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1785834635 | 611 Count | 37 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785834453 | 610 Count | 37 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1785834270 | 609 Count | 37 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1785834087 | 608 Count | 37 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1785833904 | 607 Count | 37 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1785833721 | 606 Count | 37 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1785833538 | 605 Count | 37 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1785833356 | 604 Count | 37 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785833173 | 603 Count | 37 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1785832990 | 602 Count | 37 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1785832807 | 601 Count | 37 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1785832624 | 600 Count | 37 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1785832441 | 599 Count | 37 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1785832258 | 598 Count | 37 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1785832075 | 597 Count | 37 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1785831893 | 596 Count | 37 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1785831710 | 595 Count | 37 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1785831681 | 594 Count | 37 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1785831498 | 593 Count | 37 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1785831315 | 592 Count | 37 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1785831132 | 591 Count | 37 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1785830949 | 590 Count | 37 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1785830767 | 589 Count | 37 Count | 0 Count | 4.21 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)