This is the latest recevied telemetry packets stored in our database for station/object EA7JYN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780650104 | 5.27 VDC | 0 | 0 | 0 | 0 |
| 1780650083 | 5.27 VDC | 0 | 0 | 0 | 0 |
| 1780650067 | 5.27 VDC | 0 | 0 | 0 | 0 |
| 1780650051 | 5.26 VDC | 0 | 0 | 0 | 0 |
| 1780649929 | 5.27 VDC | 0 | 0 | 0 | 0 |
| 1780647077 | 3.29 VDC | 0 | 0 | 0 | 0 |
| 1780646173 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1780645269 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1780644366 | 3.58 VDC | 0 | 0 | 0 | 0 |
| 1780643461 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1780642558 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1780640747 | 3.79 VDC | 0 | 0 | 0 | 0 |
| 1780639843 | 3.82 VDC | 0 | 0 | 0 | 0 |
| 1780638868 | 5.26 VDC | 0 | 0 | 0 | 0 |
| 1780638820 | 5.26 VDC | 0 | 0 | 0 | 0 |
| 1780586047 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1780585143 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1780584493 | 3.51 VDC | 0 | 0 | 0 | 0 |
| 1780582438 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1780582284 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1780582120 | 3.67 VDC | 0 | 0 | 0 | 0 |
| 1780580809 | 5.28 VDC | 0 | 0 | 0 | 0 |
| 1780580794 | 5.28 VDC | 0 | 0 | 0 | 0 |
| 1780580359 | 5.3 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)