This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | PRES* | SAT* | HDOP* |
|---|---|---|---|---|---|
| 1740164415 | 37 °C | 43 % | 1007 mBar | 9 | 0 |
| 1740164295 | 37 °C | 43 % | 1007 mBar | 8 | 1 |
| 1740164175 | 37 °C | 43 % | 1007 mBar | 7 | 1 |
| 1740164055 | 37 °C | 43 % | 1007 mBar | 9 | 0 |
| 1740163935 | 37 °C | 43 % | 1007 mBar | 8 | 0 |
| 1740163815 | 37 °C | 43 % | 1007 mBar | 8 | 1 |
| 1740163695 | 37 °C | 43 % | 1007 mBar | 7 | 1 |
| 1740163573 | 37 °C | 43 % | 1007 mBar | 6 | 1 |
| 1740163453 | 37 °C | 43 % | 1007 mBar | 10 | 0 |
| 1740163332 | 37 °C | 43 % | 1007 mBar | 7 | 1 |
| 1740163213 | 37 °C | 43 % | 1007 mBar | 6 | 1 |
| 1740163093 | 37 °C | 43 % | 1007 mBar | 9 | 0 |
| 1740162973 | 37 °C | 43 % | 1007 mBar | 7 | 1 |
| 1740162853 | 37 °C | 43 % | 1007 mBar | 8 | 1 |
| 1740162733 | 37 °C | 43 % | 1007 mBar | 8 | 1 |
| 1740162610 | 37 °C | 42 % | 1006 mBar | 9 | 1 |
| 1740162490 | 37 °C | 43 % | 1006 mBar | 8 | 0 |
| 1740162370 | 37 °C | 42 % | 1006 mBar | 8 | 1 |
| 1740162250 | 37 °C | 42 % | 1006 mBar | 8 | 1 |
| 1740162130 | 37 °C | 42 % | 1006 mBar | 8 | 0 |
| 1740162010 | 37 °C | 42 % | 1006 mBar | 7 | 0 |
| 1740161890 | 37 °C | 42 % | 1007 mBar | 8 | 0 |
| 1740161770 | 37 °C | 42 % | 1007 mBar | 7 | 1 |
| 1740161646 | 37 °C | 42 % | 1007 mBar | 7 | 1 |
| 1740161526 | 37 °C | 42 % | 1007 mBar | 6 | 1 |
*Used Equation Coefficients:
TEMP: 0, 1, 0
HUM: 0, 1, 0
PRES: 0, 1, 0
SAT: 0, 1, 0
HDOP: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)