This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | HDOP* | SAT* | TEMP* | HUMID* | PRESSURE* |
|---|---|---|---|---|---|
| 1775242026 | 1 DOP | 7 SAT | 33 °C | 50 % | 1000 mBar |
| 1775241126 | 0 DOP | 10 SAT | 33 °C | 50 % | 1000 mBar |
| 1775240226 | 0 DOP | 10 SAT | 33 °C | 51 % | 1000 mBar |
| 1775239326 | 0 DOP | 11 SAT | 34 °C | 51 % | 1000 mBar |
| 1775238426 | 1 DOP | 11 SAT | 34 °C | 51 % | 1001 mBar |
| 1775237525 | 0 DOP | 10 SAT | 34 °C | 51 % | 1001 mBar |
| 1775236625 | 1 DOP | 10 SAT | 34 °C | 51 % | 1001 mBar |
| 1775235725 | 0 DOP | 9 SAT | 34 °C | 52 % | 1001 mBar |
| 1775233925 | 0 DOP | 10 SAT | 34 °C | 52 % | 1001 mBar |
| 1775233025 | 1 DOP | 8 SAT | 34 °C | 52 % | 1001 mBar |
| 1775232125 | 0 DOP | 9 SAT | 34 °C | 52 % | 1001 mBar |
| 1775231225 | 0 DOP | 8 SAT | 34 °C | 52 % | 1001 mBar |
| 1775230326 | 1 DOP | 7 SAT | 34 °C | 52 % | 1001 mBar |
| 1775229425 | 0 DOP | 9 SAT | 34 °C | 51 % | 1001 mBar |
| 1775228525 | 0 DOP | 9 SAT | 34 °C | 51 % | 1001 mBar |
| 1775227625 | 0 DOP | 9 SAT | 34 °C | 51 % | 1001 mBar |
| 1775226725 | 1 DOP | 8 SAT | 34 °C | 50 % | 1001 mBar |
| 1775225825 | 0 DOP | 8 SAT | 34 °C | 51 % | 1001 mBar |
| 1775224925 | 0 DOP | 8 SAT | 34 °C | 50 % | 1001 mBar |
| 1775224025 | 1 DOP | 6 SAT | 34 °C | 50 % | 1001 mBar |
| 1775223125 | 2 DOP | 7 SAT | 34 °C | 49 % | 1000 mBar |
| 1775222225 | 1 DOP | 7 SAT | 34 °C | 49 % | 1000 mBar |
| 1775221325 | 1 DOP | 6 SAT | 34 °C | 50 % | 1000 mBar |
| 1775220425 | 1 DOP | 7 SAT | 34 °C | 50 % | 1000 mBar |
| 1775219525 | 1 DOP | 9 SAT | 35 °C | 50 % | 1000 mBar |
*Used Equation Coefficients:
HDOP: 0, 1, 0
SAT: 0, 1, 0
TEMP: 0, 1, 0
HUMID: 0, 1, 0
PRESSURE: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)