This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RF->INET* | INET->RF* | Repeater* | AllCount* | AllDrop* |
|---|---|---|---|---|---|
| 1775237022 | 9 | 0 | 38 | 40 | 1008 |
| 1775236716 | 9 | 1 | 38 | 40 | 1008 |
| 1775235500 | 9 | 1 | 38 | 40 | 1007 |
| 1775234278 | 8 | 1 | 38 | 40 | 1007 |
| 1775233059 | 9 | 0 | 38 | 40 | 1007 |
| 1775231842 | 8 | 0 | 39 | 40 | 1007 |
| 1775230621 | 7 | 1 | 38 | 40 | 1007 |
| 1775229399 | 6 | 1 | 39 | 39 | 1007 |
| 1775228183 | 6 | 1 | 39 | 39 | 1007 |
| 1775226961 | 8 | 1 | 39 | 39 | 1007 |
| 1775225741 | 7 | 1 | 39 | 38 | 1007 |
| 1775224524 | 7 | 0 | 39 | 38 | 1007 |
| 1775223303 | 6 | 1 | 39 | 37 | 1006 |
| 1775222081 | 7 | 1 | 39 | 37 | 1006 |
| 1775220864 | 9 | 0 | 39 | 37 | 1006 |
| 1775219643 | 7 | 1 | 40 | 35 | 1007 |
| 1775218421 | 8 | 1 | 40 | 34 | 1006 |
| 1775217205 | 7 | 1 | 40 | 34 | 1005 |
| 1775216276 | 8 | 0 | 40 | 33 | 1004 |
| 1775215055 | 8 | 0 | 41 | 33 | 1004 |
| 1775213838 | 9 | 1 | 41 | 33 | 1004 |
| 1775212617 | 8 | 1 | 41 | 32 | 1003 |
| 1775211395 | 6 | 1 | 41 | 31 | 1003 |
| 1775210179 | 8 | 1 | 41 | 31 | 1003 |
| 1775208957 | 9 | 1 | 42 | 30 | 1002 |
*Used Equation Coefficients:
RF->INET: 0, 1, 0
INET->RF: 0, 1, 0
Repeater: 0, 1, 0
AllCount: 0, 1, 0
AllDrop: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)