This is the latest recevied telemetry packets stored in our database for station/object BG2VZP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791140593 | 5 | 233 | 1006 | 1149 | 0 |
| 1791137581 | 5 | 232 | 1007 | 1149 | 0 |
| 1791134571 | 5 | 232 | 1007 | 1152 | 0 |
| 1791131562 | 5 | 232 | 1007 | 1152 | 0 |
| 1791128552 | 6 | 231 | 1007 | 1149 | 0 |
| 1791125510 | 3 | 228 | 1007 | 1149 | 0 |
| 1791122450 | 4 | 223 | 1007 | 1149 | 0 |
| 1791119370 | 5 | 219 | 1007 | 1152 | 0 |
| 1791116312 | 2 | 225 | 1007 | 1149 | 0 |
| 1791112973 | 5 | 224 | 1007 | 1146 | 0 |
| 1791109959 | 5 | 228 | 1007 | 1152 | 0 |
| 1791106942 | 6 | 234 | 1006 | 1152 | 0 |
| 1791103925 | 4 | 238 | 1006 | 1149 | 0 |
| 1791100912 | 5 | 248 | 1005 | 1152 | 0 |
| 1791097884 | 4 | 257 | 1005 | 1149 | 0 |
| 1791094861 | 5 | 282 | 1005 | 1152 | 0 |
| 1791091831 | 7 | 329 | 1005 | 1152 | 0 |
| 1791088772 | 7 | 306 | 1005 | 1149 | 0 |
| 1791085733 | 7 | 314 | 1005 | 1152 | 0 |
| 1791082665 | 5 | 306 | 1004 | 1149 | 0 |
| 1791079026 | 4 | 300 | 1004 | 1152 | 0 |
| 1791075988 | 4 | 288 | 1004 | 1149 | 0 |
| 1791072951 | 3 | 274 | 1003 | 1146 | 0 |
| 1791069916 | 6 | 269 | 1003 | 1146 | 0 |
| 1791066880 | 5 | 265 | 1003 | 1144 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)