This is the latest recevied telemetry packets stored in our database for station/object SR9SRC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765011577 | 0 Count | 65 Count | 0 Count | 0 VDC | 0 VDC |
| 1765010977 | 0 Count | 61 Count | 0 Count | 0 VDC | 0 VDC |
| 1765010377 | 0 Count | 58 Count | 0 Count | 0 VDC | 0 VDC |
| 1765009777 | 0 Count | 53 Count | 0 Count | 0 VDC | 0 VDC |
| 1765009177 | 0 Count | 50 Count | 0 Count | 0 VDC | 0 VDC |
| 1765008577 | 0 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1765007977 | 0 Count | 38 Count | 0 Count | 0 VDC | 0 VDC |
| 1765007377 | 0 Count | 34 Count | 0 Count | 0 VDC | 0 VDC |
| 1765006777 | 0 Count | 31 Count | 0 Count | 0 VDC | 0 VDC |
| 1765006176 | 0 Count | 28 Count | 0 Count | 0 VDC | 0 VDC |
| 1765005576 | 0 Count | 25 Count | 0 Count | 0 VDC | 0 VDC |
| 1765004976 | 0 Count | 23 Count | 0 Count | 0 VDC | 0 VDC |
| 1765004376 | 0 Count | 21 Count | 0 Count | 0 VDC | 0 VDC |
| 1765003776 | 0 Count | 17 Count | 0 Count | 0 VDC | 0 VDC |
| 1765003176 | 0 Count | 7 Count | 0 Count | 0 VDC | 0 VDC |
| 1765002576 | 0 Count | 4 Count | 0 Count | 0 VDC | 0 VDC |
| 1765001976 | 0 Count | 1 Count | 0 Count | 0 VDC | 0 VDC |
| 1765001376 | 0 Count | 1001 Count | 0 Count | 0 VDC | 0 VDC |
| 1765000776 | 0 Count | 998 Count | 0 Count | 0 VDC | 0 VDC |
| 1765000176 | 0 Count | 994 Count | 0 Count | 0 VDC | 0 VDC |
| 1764999576 | 0 Count | 991 Count | 0 Count | 0 VDC | 0 VDC |
| 1764998976 | 0 Count | 988 Count | 0 Count | 0 VDC | 0 VDC |
| 1764998376 | 0 Count | 984 Count | 0 Count | 0 VDC | 0 VDC |
| 1764997775 | 0 Count | 982 Count | 0 Count | 0 VDC | 0 VDC |
| 1764997177 | 0 Count | 979 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)