This is the latest recevied telemetry packets stored in our database for station/object KG5BQX-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791143164 | 13.57 Volts | 83.29 DegF | 270 | 0 | 0 |
| 1791143136 | 13.45 Volts | 83.29 DegF | 269 | 0 | 0 |
| 1791143120 | 13.57 Volts | 83.29 DegF | 270 | 0 | 0 |
| 1791143113 | 13.62 Volts | 83.29 DegF | 272 | 0 | 0 |
| 1791143096 | 13.6 Volts | 82.41 DegF | 271 | 0 | 0 |
| 1791143079 | 13.68 Volts | 82.41 DegF | 267 | 0 | 0 |
| 1791143074 | 13.54 Volts | 82.41 DegF | 269 | 0 | 0 |
| 1791143013 | 13.6 Volts | 82.41 DegF | 270 | 0 | 0 |
| 1791142924 | 13.62 Volts | 82.41 DegF | 270 | 0 | 0 |
| 1791142835 | 13.68 Volts | 81.53 DegF | 274 | 0 | 0 |
| 1791142810 | 13.71 Volts | 81.53 DegF | 272 | 0 | 0 |
| 1791142787 | 13.8 Volts | 81.53 DegF | 272 | 0 | 0 |
| 1791142672 | 13.65 Volts | 81.53 DegF | 270 | 0 | 0 |
| 1791142575 | 13.83 Volts | 80.65 DegF | 274 | 0 | 0 |
| 1791142481 | 13.74 Volts | 79.77 DegF | 275 | 0 | 0 |
| 1791142364 | 13.89 Volts | 79.77 DegF | 275 | 0 | 0 |
| 1791142269 | 14.01 Volts | 78.89 DegF | 275 | 0 | 0 |
| 1791142225 | 14.15 Volts | 78.01 DegF | 277 | 0 | 0 |
| 1791142167 | 14.18 Volts | 76.25 DegF | 276 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)