This is the latest recevied telemetry packets stored in our database for station/object IW1RID-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785847799 | 16 Pkt/10m | 3 Pkt/10m | 4.06 Volt | 0 | 0 |
| 1785846594 | 14 Pkt/10m | 2 Pkt/10m | 4.08 Volt | 0 | 0 |
| 1785844183 | 16 Pkt/10m | 1 Pkt/10m | 4.17 Volt | 0 | 0 |
| 1785842978 | 12 Pkt/10m | 3 Pkt/10m | 4.1 Volt | 0 | 0 |
| 1785841773 | 19 Pkt/10m | 2 Pkt/10m | 4.06 Volt | 0 | 0 |
| 1785840570 | 16 Pkt/10m | 1 Pkt/10m | 4.08 Volt | 0 | 0 |
| 1785839364 | 12 Pkt/10m | 2 Pkt/10m | 4.17 Volt | 0 | 0 |
| 1785838158 | 16 Pkt/10m | 3 Pkt/10m | 4.16 Volt | 0 | 0 |
| 1785836947 | 15 Pkt/10m | 1 Pkt/10m | 4.06 Volt | 0 | 0 |
| 1785835743 | 10 Pkt/10m | 1 Pkt/10m | 4.1 Volt | 0 | 0 |
| 1785834538 | 10 Pkt/10m | 1 Pkt/10m | 4.16 Volt | 0 | 0 |
| 1785833334 | 12 Pkt/10m | 0 Pkt/10m | 4.12 Volt | 0 | 0 |
| 1785832130 | 9 Pkt/10m | 0 Pkt/10m | 4.1 Volt | 0 | 0 |
| 1785830924 | 10 Pkt/10m | 0 Pkt/10m | 4.14 Volt | 0 | 0 |
| 1785829719 | 14 Pkt/10m | 1 Pkt/10m | 4.08 Volt | 0 | 0 |
| 1785828514 | 8 Pkt/10m | 1 Pkt/10m | 4.1 Volt | 0 | 0 |
| 1785827310 | 14 Pkt/10m | 1 Pkt/10m | 4.17 Volt | 0 | 0 |
| 1785826105 | 17 Pkt/10m | 0 Pkt/10m | 4.1 Volt | 0 | 0 |
| 1785824900 | 10 Pkt/10m | 1 Pkt/10m | 4.12 Volt | 0 | 0 |
| 1785823695 | 5 Pkt/10m | 0 Pkt/10m | 4.19 Volt | 0 | 0 |
| 1785822490 | 16 Pkt/10m | 1 Pkt/10m | 4.08 Volt | 0 | 0 |
| 1785821285 | 11 Pkt/10m | 2 Pkt/10m | 4.19 Volt | 0 | 0 |
| 1785820080 | 8 Pkt/10m | 1 Pkt/10m | 4.06 Volt | 0 | 0 |
| 1785818875 | 15 Pkt/10m | 1 Pkt/10m | 4.06 Volt | 0 | 0 |
| 1785817670 | 13 Pkt/10m | 1 Pkt/10m | 4.04 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)