This is the latest recevied telemetry packets stored in our database for station/object SP7THR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785860742 | 0 Count | 101 Count | 0 Count | 0 VDC | 0 VDC |
| 1785859542 | 0 Count | 101 Count | 0 Count | 0 VDC | 0 VDC |
| 1785858342 | 0 Count | 101 Count | 0 Count | 0 VDC | 0 VDC |
| 1785857142 | 0 Count | 101 Count | 0 Count | 0 VDC | 0 VDC |
| 1785855941 | 0 Count | 101 Count | 0 Count | 0 VDC | 0 VDC |
| 1785854741 | 0 Count | 99 Count | 0 Count | 0 VDC | 0 VDC |
| 1785853541 | 0 Count | 81 Count | 0 Count | 0 VDC | 0 VDC |
| 1785852341 | 0 Count | 34 Count | 0 Count | 0 VDC | 0 VDC |
| 1785851141 | 0 Count | 19 Count | 0 Count | 0 VDC | 0 VDC |
| 1785849941 | 0 Count | 1003 Count | 0 Count | 0 VDC | 0 VDC |
| 1785848741 | 0 Count | 989 Count | 0 Count | 0 VDC | 0 VDC |
| 1785847543 | 0 Count | 981 Count | 0 Count | 0 VDC | 0 VDC |
| 1785846343 | 0 Count | 972 Count | 0 Count | 0 VDC | 0 VDC |
| 1785845143 | 0 Count | 961 Count | 0 Count | 0 VDC | 0 VDC |
| 1785843943 | 0 Count | 954 Count | 0 Count | 0 VDC | 0 VDC |
| 1785842743 | 0 Count | 945 Count | 0 Count | 0 VDC | 0 VDC |
| 1785841543 | 0 Count | 934 Count | 0 Count | 0 VDC | 0 VDC |
| 1785840342 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1785839142 | 0 Count | 917 Count | 0 Count | 0 VDC | 0 VDC |
| 1785837942 | 0 Count | 912 Count | 0 Count | 0 VDC | 0 VDC |
| 1785836741 | 0 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1785835541 | 0 Count | 889 Count | 0 Count | 0 VDC | 0 VDC |
| 1785834341 | 0 Count | 877 Count | 0 Count | 0 VDC | 0 VDC |
| 1785833141 | 0 Count | 866 Count | 0 Count | 0 VDC | 0 VDC |
| 1785831941 | 0 Count | 862 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)