This is the latest recevied telemetry packets stored in our database for station/object SP7THR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785825941 | 0 Count | 586 Count | 0 Count | 0 VDC | 0 VDC |
| 1785824741 | 0 Count | 586 Count | 0 Count | 0 VDC | 0 VDC |
| 1785823541 | 0 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
| 1785822340 | 0 Count | 528 Count | 0 Count | 0 VDC | 0 VDC |
| 1785821140 | 0 Count | 473 Count | 0 Count | 0 VDC | 0 VDC |
| 1785819940 | 0 Count | 456 Count | 0 Count | 0 VDC | 0 VDC |
| 1785818740 | 0 Count | 448 Count | 0 Count | 0 VDC | 0 VDC |
| 1785817540 | 0 Count | 430 Count | 0 Count | 0 VDC | 0 VDC |
| 1785816340 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1785815140 | 0 Count | 372 Count | 0 Count | 0 VDC | 0 VDC |
| 1785813940 | 0 Count | 334 Count | 0 Count | 0 VDC | 0 VDC |
| 1785812740 | 0 Count | 283 Count | 0 Count | 0 VDC | 0 VDC |
| 1785811540 | 0 Count | 249 Count | 0 Count | 0 VDC | 0 VDC |
| 1785810340 | 0 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1785809140 | 0 Count | 163 Count | 0 Count | 0 VDC | 0 VDC |
| 1785807939 | 0 Count | 124 Count | 0 Count | 0 VDC | 0 VDC |
| 1785806739 | 0 Count | 100 Count | 0 Count | 0 VDC | 0 VDC |
| 1785805539 | 0 Count | 62 Count | 0 Count | 0 VDC | 0 VDC |
| 1785804341 | 0 Count | 28 Count | 0 Count | 0 VDC | 0 VDC |
| 1785803141 | 0 Count | 20 Count | 0 Count | 0 VDC | 0 VDC |
| 1785801941 | 0 Count | 1023 Count | 0 Count | 0 VDC | 0 VDC |
| 1785800740 | 0 Count | 988 Count | 0 Count | 0 VDC | 0 VDC |
| 1785799540 | 0 Count | 947 Count | 0 Count | 0 VDC | 0 VDC |
| 1785798340 | 0 Count | 872 Count | 0 Count | 0 VDC | 0 VDC |
| 1785797140 | 0 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)