This is the latest recevied telemetry packets stored in our database for station/object W5SMB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765815628 | 501 Volts | 580 Deg.F | 0 | 0 | 0 |
| 1765815567 | 501 Volts | 579 Deg.F | 0 | 0 | 0 |
| 1765815544 | 498 Volts | 577 Deg.F | 0 | 0 | 0 |
| 1765815484 | 499 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1765815331 | 499 Volts | 569 Deg.F | 0 | 0 | 0 |
| 1765815301 | 498 Volts | 567 Deg.F | 0 | 0 | 0 |
| 1765815273 | 497 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1765815268 | 497 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1765815262 | 498 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1765815257 | 495 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1765815226 | 501 Volts | 563 Deg.F | 0 | 0 | 0 |
| 1765815196 | 496 Volts | 562 Deg.F | 0 | 0 | 0 |
| 1765815165 | 493 Volts | 560 Deg.F | 0 | 0 | 0 |
| 1765815135 | 492 Volts | 558 Deg.F | 0 | 0 | 0 |
| 1765815105 | 497 Volts | 556 Deg.F | 0 | 0 | 0 |
| 1765815075 | 497 Volts | 554 Deg.F | 0 | 0 | 0 |
| 1765815069 | 495 Volts | 554 Deg.F | 0 | 0 | 0 |
| 1765815032 | 493 Volts | 551 Deg.F | 0 | 0 | 0 |
| 1765815012 | 497 Volts | 550 Deg.F | 0 | 0 | 0 |
| 1765814991 | 495 Volts | 549 Deg.F | 0 | 0 | 0 |
| 1765814966 | 489 Volts | 548 Deg.F | 0 | 0 | 0 |
| 1765814935 | 483 Volts | 548 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)