This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1791413391 | 9 | 22.9 C | 3.4 V | 560 M | 0 |
| 1791410392 | 10 | 26 C | 3.5 V | 550 M | 0 |
| 1791407392 | 8 | 28.3 C | 3.52 V | 540 M | 0 |
| 1791404969 | 7 | 31.3 C | 3.68 V | 540 M | 0 |
| 1791404681 | 8 | 31.2 C | 3.67 V | 530 M | 0 |
| 1791404423 | 8 | 31 C | 3.67 V | 510 M | 0 |
| 1791404111 | 8 | 30 C | 3.65 V | 510 M | 0 |
| 1791388489 | 12 | 48.3 C | 3.45 V | 520 M | 0 |
| 1791382461 | 11 | 31.1 C | 3.52 V | 500 M | 0 |
| 1791378291 | 12 | 21 C | 3.58 V | 520 M | 0 |
| 1791375468 | 9 | 20.8 C | 3.76 V | 500 M | 0 |
| 1791374393 | 8 | 19.2 C | 3.71 V | 500 M | 0 |
| 1791374092 | 6 | 18.6 C | 3.7 V | 500 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)